Welcome, Guest. Please login or register.

Login with username, password and session length


Author Topic: "Big" Engine Upgrade (about 300HP)  (Read 8860 times)

Offline Medihummer

  • Assetto Corse Member
  • ****
  • Posts: 455
  • Carlo Rating: 2
    • Brussels
Re: "Big" Engine Upgrade (about 300HP)
« Reply #15 on: December 10, 2014, 12:13:55 pm »
Jamie when is you ecu back?

AbarthForum.co.uk

  • Advertisement
  • ***

    Offline sylvano

    • S2000 Member
    • *****
    • Posts: 638
    • Carlo Rating: 0
      • King's Mills, Barcelona, Spain
    Re: "Big" Engine Upgrade (about 300HP)
    « Reply #16 on: December 10, 2014, 12:23:55 pm »
    256hp and 242 ftlb is on standard internals  with just  bigger turbo and injectors and boost sensor

    I have a gt2860rs

    I used the gt25 in my last post as what to use if you only want 300hp

    From 250 to 400 it was

    Pistons and rods  custom cam. And head porting  bigger injectors again  bigger turbo again  and a feu different sensors

    That's it  I am thinking about going to a gtx2867r as I think I have maxed the gt2860rs


    The only reason I went to the assets corse stuff is I mullerd the 5 speed so went to a 6 speed

    To go to 6 speed the engine has to move 40mm to the left  witch ment I needed the ac engine mounts

    The lag is not as bad as it lookes I get full boost on the road at 4200 rpm

    Bigger turbo might hold the 350 for later

    If I can get 350ftlb at 7000 it works out at 490ish hp   But I am not holding my breath on that one

    All of that inside in the 1.4 T-Jet? Amazing!  :thumb: Which is your tuner/garage? TMC?
    President of AbarthCAT Owners Club
    www.facebook.com/abarthcatwonersclub

    Offline dan vbv

    • S2000 Member
    • *****
    • Posts: 1477
    • Carlo Rating: 1
    • 300hp might not be enough
      • seaton delaval
    Re: "Big" Engine Upgrade (about 300HP)
    « Reply #17 on: December 10, 2014, 04:52:39 pm »
    Ecu remap  done by sedox

    Car build done by Merlin international 
    2002 ford ka rust edition

    2011 abarth 500 is now lightly modified

    1000hp single turbo supra 6speed manual   i want one

    Offline Jamie500

    • Esseesse Member
    • ***
    • Posts: 176
    • Carlo Rating: 0
      • Linlithgow
    Re: "Big" Engine Upgrade (about 300HP)
    « Reply #18 on: December 10, 2014, 09:10:14 pm »
    I'd like to know how quick these modded cars are on the road. I cannot see how 250hp would be put on the road, considering the size/weight and gearing. Let alone 450!? What is 0-60? 30-70 40-100 times etc?
    2010 NP Abarth 500

    Offline Jsadeghipoor

    • Esseesse Member
    • ***
    • Posts: 161
    • Carlo Rating: 0
    • Tearing up London town in an Abarth 500
      • London, N1
    Re: "Big" Engine Upgrade (about 300HP)
    « Reply #19 on: December 10, 2014, 10:44:21 pm »
    I'd like to know how quick these modded cars are on the road. I cannot see how 250hp would be put on the road, considering the size/weight and gearing. Let alone 450!? What is 0-60? 30-70 40-100 times etc?

    I need to see this!
    See me skidding about Islington / Shoreditch

    Offline KK_96

    • S2000 Member
    • *****
    • Posts: 619
    • Carlo Rating: 3
      • Manchester
    Re: "Big" Engine Upgrade (about 300HP)
    « Reply #20 on: December 10, 2014, 11:01:38 pm »
    I'd like to know how quick these modded cars are on the road. I cannot see how 250hp would be put on the road, considering the size/weight and gearing. Let alone 450!? What is 0-60? 30-70 40-100 times etc?

    Good point, as far as I'm aware I'm running standard and it still spins in the dry. Got a mate at work running a corsa VXR 300 BHP and it spins horribly, we're surprisingly even up to about 80 :)
    Abarth 500 Campovolo Grey with them bright white eyes

    Offline Kimusubi007

    • S2000 Member
    • *****
    • Posts: 1112
    • Carlo Rating: 2
      • Sydney, Australia
    Re: "Big" Engine Upgrade (about 300HP)
    « Reply #21 on: December 11, 2014, 04:11:33 am »
    Jamie when is you ecu back?

    Only sent it on monday so probably not until mid Jan.... with Christmas holidays and all.

    Dan vbv, , big turbo there!!! you had to cut out the front black steel section to make room for it.....
    The G-Tech one only just fit without having to cut out..... i think the Scara73 one you have to cut out also...
    Yes, kids and golf clubs do fit in an Abarth 500!!!

    Offline dan vbv

    • S2000 Member
    • *****
    • Posts: 1477
    • Carlo Rating: 1
    • 300hp might not be enough
      • seaton delaval
    Re: "Big" Engine Upgrade (about 300HP)
    « Reply #22 on: December 11, 2014, 12:29:47 pm »
    Had to cut a lot out to fit it and the turbine housing wast rubbing the bonnet catch

    The plan it to go from a gt2860rs to a gtx2867r  and up the boost from 1.6 to 2 bar

    Then see what it's like then get custom twin scroll manifold

    Or follow everyone and see what diffrence  a intake manifold and larger throttle body  would make

    Really all I hope the diffrent turbo does is flaten out the torque curve  at the top end

    2002 ford ka rust edition

    2011 abarth 500 is now lightly modified

    1000hp single turbo supra 6speed manual   i want one

    Offline flutes

    • S2000 Member
    • *****
    • Posts: 960
    • Carlo Rating: 3
      • Sydney
    Re: "Big" Engine Upgrade (about 300HP)
    « Reply #23 on: December 12, 2014, 12:04:20 am »
    I love the "lightly modified" in your signature...
    SOLD
    500c Esseesse
    TD04L; Forge intake and elbow; DNA Rear torsion bar; HEL brake lines; G-Tech 550-ST and Le Mans exhaust with catless downpipe and 100 cell cat welded in; BC Racing BR series coilovers

    Offline Medihummer

    • Assetto Corse Member
    • ****
    • Posts: 455
    • Carlo Rating: 2
      • Brussels
    Re: "Big" Engine Upgrade (about 300HP)
    « Reply #24 on: December 12, 2014, 08:46:56 pm »
    Dan

    What is the diameter of your downpipe