Welcome, Guest. Please login or register.

Login with username, password and session length


Author Topic: Coilovers to 500SS  (Read 1904 times)

Offline Han5y

  • Assetto Member
  • **
  • Posts: 76
  • Carlo Rating: 1
    • Norway
Coilovers to 500SS
« on: September 20, 2014, 03:08:31 pm »
Hi guys!

Im thinking about coilovers for my abarth ss to get the right height. But, i see a lots of the coiloverkits gives from arround 20mm lowering to xx mm lowering.

Is 20mm lowering from the original abarth, so it will be the same as mine with SS springs (which gives aprox. 20mm)?
( )2011 500 SS
(X)2004 156 SW
( )1993 155 TS

AbarthForum.co.uk

  • Advertisement
  • ***

    Offline Han5y

    • Assetto Member
    • **
    • Posts: 76
    • Carlo Rating: 1
      • Norway
    Re: Coilovers to 500SS
    « Reply #1 on: September 20, 2014, 03:37:41 pm »
    Or to make it a little big easyer. The B14PSS says 20-50mm.
    Which means 20-50mm on a original non-SS car, and 0-30mm on my SS?
    ( )2011 500 SS
    (X)2004 156 SW
    ( )1993 155 TS

    Offline cjfraser

    • Assetto Corse Member
    • ****
    • Posts: 404
    • Carlo Rating: 0
      • Wimbledon
    Re: Coilovers to 500SS
    « Reply #2 on: September 20, 2014, 03:59:51 pm »
    I have learnt after fitting mine that the adjustment values for the coilovers are literally just for the coilovers. I didn't have instructions or base settings to start from, there wasn't a set height given for a standard or for an SS...does that make any sense? ???

    Anyway the AP coilovers i have are 10mm from the highest settings and the car sits around 10-15 mm lower than SS springs i had before.  :thumb: