Welcome, Guest. Please login or register.

Login with username, password and session length


« previous next »
Pages: 1 2 [3] 4   Go Down

Author Topic: Upgrading the Abarth with a GT1446 turbo.  (Read 57789 times)

Offline 124grandeabarth

  • Abarth Wannabe
  • *
  • Posts: 7
  • Carlo Rating: 0
    • Denmark
Re: Upgrading the Abarth with a GT1446 turbo.
« Reply #30 on: April 01, 2013, 09:45:51 am »
Yes I using tributo intake too the original airbox.
All sensor and injectors has been change.
Logged
ABARTH 500 ESSEESSE
**160 bhp in a car the size with a shoes**
(topgear)

AbarthForum.co.uk

  • Advertisement
  • ***
    Sponsored Links

    Offline Hampe

    • Abarth Wannabe
    • *
    • Posts: 32
    • Carlo Rating: 0
      • Sweden
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #31 on: April 22, 2013, 08:36:06 pm »
    Was pretty much just about to order the kit for 1799 GBP from TMC.

    But after some e-mailing between me and TMC, they didnt recommend just getting the turbo with manifold and cat, but getting the kit 3495 GBP with uprated injectors and such.

    Thats like double the price, so for me as for now, No Go...
    Logged

    Offline rallyman

    • Assetto Member
    • **
    • Posts: 69
    • Carlo Rating: 1
      • Gatwick
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #32 on: May 07, 2013, 08:33:11 pm »
    I have the 500 AC race car converted for the road. I just ran it on the dyno - 205 hp at 5300 and 292Nm with very flat torque curve from 3000 to 5000.
    Spec is GT1446 with 300cc injectors, updated boost sensor, marelli exhaust with cat and cone filter. I believe peak boost is 1.6 bar at 3000 but it reduces to 1.1 bar by 6000. (That is the standard AC map).
    Very easy to drive on the road, but feels a bit flat over 5000.

    Just about to remap for more boost at the top end, so will keep you posted.
    Logged

    Offline londonrichie

    • Assetto Corse Member
    • ****
    • Posts: 407
    • Carlo Rating: 1
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #33 on: May 07, 2013, 10:31:15 pm »
    Definitely more to give with the turbo. I have 290nm torque on the standard SS turbo...

    Mightydquinn has remapped his A500 to 235bhp/325nm running a very similar same set up on the GT1446. Good luck :thumb:
    Logged
    500SS - bossa nova white with white wheels

    Offline dan vbv

    • S2000 Member
    • *****
    • Posts: 1477
    • Carlo Rating: 1
    • 300hp might not be enough
      • seaton delaval
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #34 on: May 08, 2013, 01:23:46 pm »
    when i did mine

    i was undecided weather to go for the gt1446 kit or the 230kit   

    thay are very close in price i am glad i went for the 230 kit

    as it is going to be cheaper for me in the long run as i am looking at 300+hp and 300ftlb

    my car is only running 1.55 bar of boost the turbo can run 1.8 so i just need to upgrade the inside of the engine and get a custom map to get more power

    you could get the gt1446 and fit it get a custom map but you want get the power it is capable of   but once its on the car and running you could to the other bits when you can afford them to take the power up

    Logged
    2002 ford ka rust edition

    2011 abarth 500 is now lightly modified

    1000hp single turbo supra 6speed manual   i want one

    Offline Han5y

    • Assetto Member
    • **
    • Posts: 76
    • Carlo Rating: 1
      • Norway
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #35 on: October 04, 2014, 04:37:53 pm »
    Its a little bump, but its much of the same as the threadstarters.

    Have the 1800£ kit been removed from TMC? I cant found it..

    Is it removed becouse he recomends the more expensive kits..?
    Logged
    ( )2011 500 SS
    (X)2004 156 SW
    ( )1993 155 TS

    Offline Sphilli2004

    • Esseesse Member
    • ***
    • Posts: 134
    • Carlo Rating: 0
      • Watford
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #36 on: October 04, 2014, 07:19:24 pm »
    I think scara73 is the way to go over TMC now. The kit is much cheaper and like the TMC kit you get everything, unlike the TMC kit you can pick and choose what bits you want. They also do a number of turbos where you use an interflange so you can keep the stock manifold and get 225+ bhp

    Perhaps people can correct me if I am wrong but I believe TMC get a lot of bits from Scara73 and then add their premium, I think TMC are quite expensive on some bits.

    Logged

    Offline pederb

    • Esseesse Member
    • ***
    • Posts: 110
    • Carlo Rating: 0
      • Berlin
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #37 on: October 31, 2014, 10:50:24 am »
    Why not take a GT1752S from a Saab Turbo, thats a step up turbo from the GT1446. I have the GT1446 on my US built Abarth
    Logged
    -Peder Beckman-
    2018 695 Abarth XSR
    180 hp Kit, Akrapovic Exhaust

    Offline mightydquinn

    • S2000 Member
    • *****
    • Posts: 3141
    • Carlo Rating: 3
    • YELLOW is the new White
      • bradford yorkshire
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #38 on: October 31, 2014, 02:49:16 pm »
    The advantage with TMC is
    He tries all the different options

    I have dealt with him
    From Abarth day 1
    The service and back up
    Product knowledge are first class
    I don't think he is expensive.


    I have taken my 1446 off.
    And going hybrid target a nice useable 270 Bhp
    I like the 1446 as it is designed for that engine and bolts straight on and works exceptionally well to produce 235.
    New car new project.
    Logged

    Offline ConnorAbarth

    • Abarth Wannabe
    • *
    • Posts: 11
    • Carlo Rating: 0
    • Bristol
      • Bristol
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #39 on: September 13, 2015, 11:20:53 am »
    So say if i bought a garrett would it bolt straight on to my stock manifold? Thanks.
    Logged
    ABARTH 500 / COILOVERS / BLUESPARK CHIP / BMC AIR AILTER

    Offline J_a_m_e_s

    • S2000 Member
    • *****
    • Posts: 1926
    • Carlo Rating: 1
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #40 on: September 13, 2015, 11:28:48 am »
    No
    Logged
    South Wales Member

    Offline benn

    • S2000 Member
    • *****
    • Posts: 2123
    • Carlo Rating: 8
      • Cumbria
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #41 on: September 14, 2015, 09:21:27 am »
    Quote from: ConnorAbarth on September 13, 2015, 11:20:53 am
    So say if i bought a garrett would it bolt straight on to my stock manifold? Thanks.

    Nope. It can be modified i believe.

    But easiest option would be just to buy the manifold off the Punto for that turbo.
    Logged

    Offline ConnorAbarth

    • Abarth Wannabe
    • *
    • Posts: 11
    • Carlo Rating: 0
    • Bristol
      • Bristol
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #42 on: September 23, 2015, 03:36:58 pm »
    So would the punto manifold fit the 500?
    Logged
    ABARTH 500 / COILOVERS / BLUESPARK CHIP / BMC AIR AILTER

    Offline Danny-hall

    • Assetto Member
    • **
    • Posts: 78
    • Carlo Rating: 0
    • Abarth 500
      • Manchester england
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #43 on: September 23, 2015, 05:45:45 pm »
    Mightydquin, you said your hoping to go upto 270bhp are you doing that on standard internals or is your engine forged? Iv read that the engine only with stand 260bhp and around 320nm, be good to see how you go with 270bhp cos im running a TD04 turbo on my a500 capable off around 280bhp so i could turn boost up if your running 270bhp, im at 230/240 now
    Logged
    TD04 13t upgrade
    Custom exhaust
    Dcat
    Bosche ev13 380cc injectors
    Fuel pressure regulator
    Turbo-smart boost controller
    220bhp

    Offline benn

    • S2000 Member
    • *****
    • Posts: 2123
    • Carlo Rating: 8
      • Cumbria
    Re: Upgrading the Abarth with a GT1446 turbo.
    « Reply #44 on: September 23, 2015, 08:55:57 pm »
    Quote from: ConnorAbarth on September 23, 2015, 03:36:58 pm
    So would the punto manifold fit the 500?

    Yeah if you buy one from a grande punto esseesse or similar.
    Logged
    Pages: 1 2 [3] 4   Go Up
    « previous next »
     

    hungry
     
    Terms of Use
    Copyright
    Privacy Policy