Introduction and Offers for forum members

[JordanRNWAbarth]

Hi Edd,

I already have a blue spark and i have been running it on setting C with great results. Yesterday I fitted a Novitec challange evo 2 exhaust backbox. What setting would you recommend I now have it on for the best increase in BHP and Torque?

Thanks

Jordan

[AbarthForum.co.uk]

[edd@bluespark]

Hi Jordan,
I'm glad to hear you are getting good results.

For lightly modified cars we usually reccomend setting the unit to map D. The results do vary slightly from car to car, so the best thing to do is just try give it a try and see how it drives.

Best regards,
Edd

[JordanRNWAbarth]

Thanks Edd.

I will have a play around with it tonight!

[koi]

Will the Bluespark from a 2014 Abarth 595 160bhp need reprogrammed to work on a 2011 Abarth 500 135bhp?

[edd@bluespark]

To go from a 160 to a 135 model then it really should be reprogrammed yes. Please use the reprogramming page on our website (http://www.bluesparkautomotive.com/programming) if you require this.
Best regards,
Edd

[JordanRNWAbarth]

Hi Edd,

Thanks to to great product and advice im pleased to say my standard 135bhp and 170 ft-lbs abarth ran well over that today.
Got 167nhp & 211ft-lbs.
The only mods i have done is fit the bluespark, a novitec back back and a bmc pop off valve. I am extremely happy!

Cheers

Jordan

[Crazylegscraneop]

That's swayed me, I'm ordering one !

[JordanRNWAbarth]

That's swayed me, I'm ordering one !

You won't regret it!

[Crazylegscraneop]

Sorted and ordered, thanks Edd

[124Abarthreplica]

Hi Edd

I've sent you a PM

[edd@bluespark]

I've just replied mate

[Crazylegscraneop]

Fantastic piece of kit, highly recommended, makes a hell of a difference, thanks Edd !!

[Mastoras]

  Hello! Fitted my bluespark box and i have some questions. The boost reading gauge is still accurate with bluespark? After installing the box it reads 1.3-1.4 under full acceleration in 4th and 5th gear.

  When i turn the ignition key without starting the engine the light indicator of bluespark is green. When i start the car it turns blue. That's the normal right?

  And finally.. the box arrived with a black bag.Should i put the bluespark box in the bag under the hood when i finish the installation ?  thanx

[edd@bluespark]

Hi there,
The boost gauge is not accurate after fitting the Bluespark unit. It will most of the time read lower than the actual value of boost pressure that you are achieving. This is nothing to worry about, but is unavoidable due to being an electronic gauge that shows the value of boost pressure that the ECU believes to be true.

Those light sequences are quite normal, it will usually change to a blue light as the car is started.

Yes, please use the black bag to cover your unit. This is not necessary but is included to keep the unit clean in an under bonnet environment.

I hope this helps,
Best regards,
Edd
 

 

[Mastoras]

It does help Edd! Thank you for the instant reply.

Cheers