Problem solved and Update installed
Suddenly I saw small i's in the instruction for the update on the mopar site.
(i) The engine must be kept running and the radio must be kept on during the update. You can drive the car, but navigator functions will not available until the end of the update.The installation process will be interrupted and must be started again from the beginning if the radio is switched off. Do not remove the USB flash drive until the installation process has been completed. In case of navigation system errors and for more information on the installation process, you can see the Guide or contact Customer Service. If you want, you can have the maps updated at an authorised Workshop. In this case, the dealer may charge you for the cost related to the installation of the update on your navigation system.
I could click on Guide and found:
Message “A” (Update failed) will appear on the navigation system if the flash drive is disconnected during the installation process followed by message B after the window has been closed. Plug the device into the USB port again and start the installation from the beginning.
If the error message persists:
- save the map file and the licence on a new USB flash drive
- or check that the file system of the flash drive is ExFAT.
Remember that using device such as smartphones, hard disks or tablets is not advised.
I bought a goed new USB stick (Kingston) and the update succeeded in one time.
Your Privacy Choices